The steps to use the water toy are as follows:
Site preparation. First of all, you need to choose a level field and make sure that the ground is free of sharp objects, such as screws, glass shards, etc., to avoid cutting the pool.
Aeration. Connect the inflatable pump to the inflatable port of the swimming pool, turn on the switch and start inflating. When the pool becomes three-dimensional and feels hard when pressed by hand, turn off the inflator pump and plug the inflatable hole. Electric pumps can also be used, which have high inflation efficiency and are suitable for medium and large inflatable products. According to the inflatable port of the pool body, select the corresponding air valve to cover the air port for inflation.
Affusion. Once the inflation is complete, a certain amount of water is poured into the pool. The principle of water injection is that the water level height is best controlled to 2/3 to prevent product deformation and damage.
Use. The pool was usable and could be stocked with some small fish or toys for the children to play with.
Drainage and storage. When it is finished, it can be drained through the side drain valve. After draining the water, wipe off the traces of water, fold them as they are, and place them together with the repair supplies. It is also possible to use an external drain pipe and open the side drain valve to drain the water.
