Detailed Explanation Of The Inflatable Method Of Water Toys

1. Use an aerator to inflat
Aerators are the most convenient way to inflate, especially for large water toys, where manual inflation takes a lot of time and physical effort. Here are the steps to use an aerator:
1. Prepare the aerator as well as the plug, which should match the inflatable hole on the water toy.
2. Confirm that the power supply of the inflator is normal and the plug has been inserted into the inflator hole.
3. Press the aerator switch and inflate gradually as needed until the water play toy is fully inflated.
4. Pull out the plug and seal the inflatable hole with an air valve to prevent air leakage.
2. Manual inflation method
If you don't have an aerator, you can also do it manually. It takes some time and stamina, but it works well for small water toys or inflatable toys. Here are the steps for manual inflation:
1. Identify the inflatable hole and open the valve.
2. Draw air through your mouth or air pump and inject air into the water play toy through the inflatable hole.
3. After injecting an appropriate amount of air, seal the inflatable hole immediately with an air valve to prevent air leakage.
4. Repeat the above steps step by step until the water play toy is completely filled with gas.