Safety standards for the production of plush toys

1. Standards for the safe use of manual needles
(1) The manual needle cannot be directly inserted into the toy, and the person must pull it out from the needle and place it on the fixed soft bag.
(2) Another needle must be found for broken needles, and toys that cannot be found must be found through the probe, and then reported to the supervisor for new needles through two needles.
(3) Each manual can only issue one work needle.
2. The accessories on the toy, such as glasses, nose, buttons, scarves, bow ties, flower bows, etc., must be fastened and not loosened, and meet the requirements of tensile force to prevent children from accidentally tearing off and eating by mistake, and the danger occurs.
3. All fabrics, fillers, and accessories of plush toys cannot have toxic chemicals, so as to avoid poisoning by children's tongue licking.
4. The cotton filling must reach the required weight, the cotton filling of the mouth must be full, and the toy can not be deformed after the cotton filling, and the effect requires the image to be full and the feel is soft.
5. The job responsibility of blowing is to blow the broken wool and plush on the toy, and the work is required to be clean and thorough, especially the face and ears of the toy.
6. The bag must be checked when packing, and there should be no scissors, drills and other metal items left in it.